Search Results for: lettering

Lettering

The debate related to dating associated with Unitron lettering, whether it be Blocked or Italic, continues.  Some specific information uncovered to date:

  • United Trading Company started with Blocked lettering in both its ads and on its telescopes and accessories when it first went public in October 1951
  • Lawrence Fine registered a Blocked lettering Unitron trademark in 1954 for first use in commerce in 1952
  • Blocked Unitron trademark lettering appeared throughout the 1956 Unitron catalog
  • Italic lettering first appeared in the company name in the Unitron advertisements in the 1957 Sky and Telescope magazines
  • Italic lettering on a product first appeared in an April 1957 Sky and Telescope advertisement; it was included as part of the introduction of the new 160V and 166V models and shown on the graduated focusing scale focuser
  • Italic lettering appeared throughout the 1958 Unitron catalog; Italic was used in the company name and also shown on most telescopes to include: Models 114, 128, 140, 142, 145, 150, 166 and several of the Unihex accessories; Note: it was difficult to see the Model 152 but it is safe to assume it was also Italic
  • Italic lettering appeared in the company name in the 1970 Unitron catalog but Blocked lettering was shown on all the telescopes and accessories
  • Italic lettering appeared in the company name in the 1972 Unitron catalog but Blocked lettering was still shown on most telescopes and the accessories; the 4 inch models shown with Italic lettering were the exceptions;  the Blocked lettering used was the Unitron trademark lettering
  • Italic lettering appeared in several separate 1977 Unitron catalogs (80mm Spotting Scope and Model 131C); it was used both in the company name and shown on the telescopes

Note: All the early catalogs (1956, 1958, and 1972) have Unitron copyrights and used the same photographer, S.E. Burgen.

Eyepieces

The Unitron name was familiar to me having grown up with the iconic 1960-1970’s S&T full page ads and the Unitron catalogues on my bookshelf. I owned two short focal length (9, 12mm) Unitron orthoscopic eyepieces in the 1980’s when I was utilizing a Parks 8″ f/4 reflector. At the time they weren’t anything special to me because I was mostly interested in wider field views. They did offer up wonderful narrow field views of M42 in that 8″ scope but at some point I rotated out of them into Naglers.

Fast forward to the late 2000’s. At that point I was only utilizing refractors and had picked up a 60mm Unitron. This little scope could punch above its aperture with double Jupiter moon transits a fun challenge to chase across the winter evening sky. The .965″ eyepieces could be a hit or miss quality proposition (as I came to learn) but the set I had left nothing to be desired in this aperture and chasing these very low contrast features.

For the first 30+ years the standard eyepiece offering by Unitron was a suite of .965″ barrel eyepieces in Orthoscopic, Achromatized Symmetrical, Kellner, Ramsden and Huygens designs. I’ve seen a photograph of a Polarex eyepiece, the European branding for Nihon Seiko telescopes, of a .965” Plossl but never a Unitron brand advertised. In Unitron’s words an Achromatized Symmetrical is “An eyepiece composed of two achromatic doublets which gives a wide field with long eye relief (ie: the eye does not have to be placed uncomfortably close to the eye lens)”. Their orthoscopics were marketed for “high power planetary viewing with wide, flat fields with large eye relief”. Obviously, they never used their 4-7mm orthos. Presumably they were comparing their orthoscopic design to Huygens or other earlier designs. The early Unitron .965″s apparently had brass barrels and tops. The engraving for branding and focal length on the top was thru the paint into the base metal which has tarnished over the years to a nice golden hue earning the moniker “gold tops”. These eyepieces are noticeably heavier than the later ep’s (presumably with aluminum construction). There were changes in the writing style of “Unitron” on these eyepieces with the lettering either being block or slanted. Discussions continue as to time periods these styles were in production. For the latest theory check the Cloudy Night Classics Forum. There are also variants of the early, early sets without the Unitron branding.

In addition to individual sales, the eyepieces were supplied in sets with the telescope offerings. The smaller and more basic scopes might have 2-3 eyepieces with a .965″ diagonal, better appointed 3 and 4″ telescopes might have a boxed set of 5-7, a scope ordered with a Unihex would have a larger box to accommodate a 40mm Kellner or Monochromatic. The 4″ photo-equatorial came with even larger selections up to and including all eyepiece offerings of the time. The Super Unihex had a screw in port for a 60mm or later a 50mm Kellner eyepiece. These two were in 58mm diameter barrels with adapter rings, offered decades before 2” eyepieces were normal fare for the average astronomer. By the time of the 1956 catalogue issue the eyepiece range was pretty well established with nine .965”, a couple of 40mm 1.25” variants for the Unihex with the larger, longer Kellner’s reserved solely for the Super Unihex or direct screw onto the super focuser drawtube. In later year’s there were also illuminated eyepieces, I’ve seen a photograph of the 12.5mm in this variant.

Dave Komar’s research with original sources confirmed that Unitron sourced their eyepieces through Nihon Seiko, a Japanese marketer of astronomical equipment. The full suite of 1.25″ eyepieces were a late addition to the Unitron catalogues, in the post 1980-time frame. My research indicates these later eyepieces were exclusively a volcano top offering with slanted letter branding and straight letters for focal length and eyepiece type. These 1.25” eps were offered in a range of orthoscopics, Erfles, Koenig and Plossls. The one exception to this was the 40mm eyepiece. Over the years the 40mm appeared with a variety of lettering styles, flat and volcano top, plain and double crosshair. This eyepiece first appeared in 1955-1956 and served as their wide field eyepiece in the Unihex B accessory. It’s been engraved as a Mono, Monochro, OR and K(elner). Unitron came out with a Super Unihex circa 1955-1956 with a screw-in port for the larger format 60mm Kellner, one barrel for a 1.25″ eyepiece, the remainder .965”. The 60mm eyepiece (and later a 50mm) were threaded into an adapter to be semi-permanently mounted to the Super Unihex or removed and screwed into the back of their drawtube for straight thru viewing. It is also apparent that in the waning years of Unitron telescope sales the US distributer imported some eyepieces from Nihon Seiko without branding. This has been demonstrated either by identical measurements to branded eyepieces, N-S stickers on the barrel or purchases from first owners who described the eyepieces.

I’ve been able to document, either in ownership or via photographs posted on two CN threads, a small selection of 2” eyepieces. These are included on the following list. Dave has a copy of the original Excel file so for those who can send a photo or other documentation of additional 2” format eyepieces I’m sure he’ll keep the list updated.

Not eyepieces per se, but glass in the optical path would include the slip or screw-in barlow lens associated with the Unihex and a projection eyepiece for photography.

Jim Curry, December 2016

Unitron eyepiece list

Part 1: Photos of .965 Eyepieces:

Some older “gold top”  brass barrel eyepiece sets:

DSCN3217

DSCN3241

DSCN3219

And the more modern sets:

A complete Photo-Equatorial set:

DSCN3245

Part 2: Photos of 1.25 inch Eyepeices:

The attached photos courtesy of Jim Curry:

Uni 25 comparo Uni eps 1.25

Photos courtesy of Chuck Mitchell:

The attached photos were provided courtesy of Dave Komar; it is a complete set of 1.25 eyepieces (minus the 18mm Ortho) that came with his original 1989 vintage Unitron Model 152 plus a 20mm Erfle:

DSCN3095

The 1.25 inch Mono eyepiece came in several versions”

The eyepiece set that came with Rolando Chavez’s Model 152:

Unitron Eyepiece Set Rolando Chavez

Unitron Eyepiece Set II R.Chavez

Three of the more modern Widefield Eyepieces (13mm, 16mm, and 32mm) courtesy of Jim Curry:

UnitronWideFieldEPs

Part 3: Photos of 2 inch Eyepeices:

The following photos of 2 inch eyepieces were provided courtesy of John Volk; included are 32mm, 50mm, and 55mm:

These photos of what I believe to be a very rare 60mm Plossl were provided by Danielle Borg:

What looks to be a complete set of the different Polarex-Unitron 60mm EP’s courtesy of Stephen Brennan:

Polarex-Unitron 60mm EP's - 1 Polarex-Unitron 60mm EP's - 2 Polarex-Unitron 60mm EP's - 3

And a 60mm Kellner in a case, photo courtesy of Jon Miles:

Part 4: Miscellaneous Eyepeices :

Illuminated crosshair eyepiece (Photo courtesy of Xavier Debeerst):

polarex_crosshair

Large Polarex eyepiece set (Photo courtesy of Xavier Debeerst):

polarex_large_eyepieces

 

 

Variations

This section is in development.  It is intended to be a menu driven survey to collect data on the different models for the purpose of determining, if possible, what variations can be attributed to what year model…or what sub-contractor, if that is the case.  Still working on specific items but will likely include variations in:

  • Aperture
  • Lettering (based on review of S&T issues, UNITRON Instead of UNITRON starts appearing in advertisements in April 1957)
  • Control and focuser knobs (based on review of S&T issues, black plastic knobs first appeared in advertisements in December 1959)
  • Cases – both material and interior design
  • Tripod spreaders
  • Cradles
  • Setting Circles

Unitron Model 150

4″ (100mm or 102mm), FL 1500mm; Altazimuth Refractor – complete with mounting and slow motion controls for both altitude and azimuth, tripod, tripod shelf, 10X-42mm viewfinder, standard rack and pinion focusing, 6 eyepieces, choice of UNIHEX or star diagonal and erecting prism system, solar aperture diaphragm, sunglass, pocket eyepeice case, dewcap, dustcap, wooden cabinets

Additional accessories available: DUETRON double eyepiece, Sun projecting screen, Astro-Camera 220 with Accessories, 4″ UNICLAMP Camera Bracket

The model featured is owned by Dan Archey.  It’s an early 1954 model with the older style bolt mount, blocked UNITRON lettering, and the 100mm objective.  Photographs courtesy of Anna Luna Photography.

UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2247UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2267 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2251 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2248UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2245 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2244 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2263 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2262 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2251 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2248 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2247 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2241 UNITRON_150_ANNALUNAPHOTOGRAPHY___MG_2238UNITRON_150_ANNALUNAPHOTOGRAPHY__MG_2235

Unitron Model 114

2.4″ (60mm), FL 900mm; Altazimuth Refractor – complete with mounting and slow motion controls for both altitude and azimuth, tripod, 5X-16mm viewfinder, rack and pinion focusing, 4 eyepieces, choice of UNIHEX or star diagonal and erecting prism system, sunglass, dewcap, dustcap, wooden cabinets

Additional accessories available: DEUTRON double eyepiece, Sun projecting screen with UNICLAMPS, Astro-Camera 220 with Accessories

The Model 114 2.4 Inch Alt-azimuth Unitron is perhaps the icon of the Unitron brand.  This is because at $125 for most of the 1950’s and 60’s it was the most affordable for the young amateur astronomer.  It is also the model most represented in the Sky and Telescope advertisements of those years.

Dave Komar is the original owner of the first model featured.  He purchased the telescope in November 1959 while living in Pittsburgh, PA.  Following a minor restoration, it is in near original condition.  The telescope traveled with Dave throughout his thirty year military career and was his primary instrument from 1959 until he purchased a second Unitron Model 132/152 in March 1989.  The telescope has been used to view skies in American Samoa, Australia, Japan, and Guam…as well as throughout the United States.

This 1959 Model 114 was purchased with the UNIHEX option, as shown in the original B&W photograph.  It has black plastic control and focuser knobs, blocked UNITRON lettering, and a white with red lettering dust cap; the wooden cabinet has the metal Unitron name plate with blocked lettering; the UNIHEX with black clamp came in a wooden case.  The OTA with eyepieces and mount/tripod all fit in one wooden case.

Unitron 114_First Light

DSCN2755

DSCN2754DSCN2740 DSCN2752DSCN2743DSCN2739

DSCN2751

DSCN2744

DSCN2762 DSCN2761


This second featured Model 114 belongs to Gerald Elkin and is thought to be vintage 1959 also.  There are slight variations from the one owned by Dave Komar which is a confirmed 1959 acquisition.  Those variations include the cabinet, the UNIHEX clamp, and the locking screw for the mounting cradle.

DSC_1838 DSC_1840 DSC_1841DSC_1859 DSC_1872 DSC_1992DSC_1842

 

Unitron Model 127

1.6″ (40mm or 42mm), FL 700mm; Altazimuth Refractor – complete with mounting and slow motion controls for both altitude and azimuth, tripod, 5X-16mm viewfinder, rack and pinion focusing, 3 eyepieces, star diagonal, sunglass, dewcap, dustcap, wooden cabinet

Additional accessories: Erecting prism system

Featured are two versions of the Model 127 showing the significant variations in the mounts:  The first belongs to Charles Brault and is the 40mm version.  The second model is the 42mm version and it belongs to Will Thornton; it has the blocked UNITRON lettering and the 42mm lens; the wooden cabinet has the metal UNITRON plate.

40mm scope 2

Charles Brault’s 40mm x 700mm

40mm scope40mm finder 40mm focuser 40mm mount 2 40mm mount 3 40mm mount 40mm objective focuser backside focuser underside IMG_434040mm case 2 40mm case

 

 

 

 

 

 

 

 

 

 

 

 

DSCN2698

Will Thornton’s 42mm x 700mm

DSCN2700

DSCN2701 DSCN2707 DSCN2709

 

 

DSCN2705

Polarex Model 131

3″  Equatorial Refractor; 75mm, FL 1200mm, 8x30mm Viewfinder; 6 eyepieces; Star diagonal; Sunglass; Erecting prism; Sun projection screen; Solar aperture diaphragm

Additional accessories available: Rotary eyepiece holder, Double eyepiece holder, Sun diagonal, Camera clamp, Synchronous motor, Astro camera, Counterbalance clamp, Spectro scope, Barlow lens

Stefan Thiele of Germany is the proud owner of this pristine Model 131 which he procured in 2014.  It is in absolute mint condition with absolutely no signs of usage.  It came complete with all the bells and whistles, including a super-rare 220 Volt synchronous motor drive, a Model 128 equatorial mount, Unihex, 6 Polarex eyepieces in a wooden case, a wooden tripod with a round plate for accessories, and a wooden box for the OTA.  The oculars are straight lettering which indicates it’s a 60´s telescope, but then there are “ears” on the front lens which indicates a 70´s telescope.

Polarex 75mm auf 1200mm NS-131_05

Polarex 75mm auf 1200mm NS-131_22 Polarex 75mm auf 1200mm NS-131_23Polarex 75mm auf 1200mm NS-131_06Polarex 75mm auf 1200mm NS-131_09Polarex 75mm auf 1200mm NS-131_11 Polarex 75mm auf 1200mm NS-131_10Polarex 75mm auf 1200mm NS-131_13Polarex 75mm auf 1200mm NS-131_12Polarex 75mm auf 1200mm NS-131_16